auto-negotiation-advertisements

Configure Auto-Negotiation advertisements after you enable Auto-Negotiation.

Note

Because of port speed differences, not all parameters appear on all hardware platforms.

Syntax

auto-negotiation-advertisements 10-full
auto-negotiation-advertisements 10-half
auto-negotiation-advertisements 100-full
auto-negotiation-advertisements 100-half
auto-negotiation-advertisements 1000-full
auto-negotiation-advertisements 10000-full
auto-negotiation-advertisements 2500-full
auto-negotiation-advertisements 25000-full
auto-negotiation-advertisements 5000-full
auto-negotiation-advertisements none
auto-negotiation-advertisements port {slot/port[/sub-port][-slot/port[/sub-port]][,...][slot/all][all]} 10-full
auto-negotiation-advertisements port {slot/port[/sub-port][-slot/port[/sub-port]][,...][slot/all][all]} 10-half
auto-negotiation-advertisements port {slot/port[/sub-port][-slot/port[/sub-port]][,...][slot/all][all]} 100-full
auto-negotiation-advertisements port {slot/port[/sub-port][-slot/port[/sub-port]][,...][slot/all][all]} 100-half
auto-negotiation-advertisements port {slot/port[/sub-port][-slot/port[/sub-port]][,...][slot/all][all]} 1000-full
auto-negotiation-advertisements port {slot/port[/sub-port][-slot/port[/sub-port]][,...][slot/all][all]} 10000-full
auto-negotiation-advertisements port {slot/port[/sub-port][-slot/port[/sub-port]][,...][slot/all][all]} 2500-full
auto-negotiation-advertisements port {slot/port[/sub-port][-slot/port[/sub-port]][,...][slot/all][all]} 25000-full
auto-negotiation-advertisements port {slot/port[/sub-port][-slot/port[/sub-port]][,...][slot/all][all]} 5000-full
auto-negotiation-advertisements port {slot/port[/sub-port][-slot/port[/sub-port]][,...][slot/all][all]} none
default auto-negotiation-advertisements
default auto-negotiation-advertisements port {slot/port[/sub-port][-slot/port[/sub-port]][,...][slot/all][all]}
no auto-negotiation-advertisements
no auto-negotiation-advertisements port {slot/port[/sub-port][-slot/port[/sub-port]][,...][slot/all][all]}

Command Parameters

10-full

Advertises 10 Mbps full-duplex.

10-half

Advertises 10 Mbps half-duplex.

100-full

Advertises 100 Mbps full-duplex.

100-half

Advertises 100 Mbps half-duplex.

1000-full

Advertises 1 Gbps full-duplex.

10000-full

Advertises 10 Gbps full-duplex.

2500-full

Advertises 2.5 Gbps full-duplex.

25000-full

Advertises 25 Gbps full-duplex.

5000-full

Advertises 5 Gbps full-duplex.

none

Configures the value to none.

port {slot/port[/sub-port][-slot/port[/sub-port]][,...][slot/all][all]}

Identifies the slot and port in one of the following formats:

a single slot and port (slot/port)
a range of slots and ports (slot/port-slot/port)
a series of slots and ports (slot/port,slot/port,slot/port)
all ports on the same slot (slot/all)
all ports on the switch (all)

If the platform supports channelization and the port is channelized, you must also specify the sub-port in the format slot/port/sub-port.

Default

None

Command Mode

GigabitEthernet Interface Configuration